Installation

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY

(a) for Driver Side:

(1) Install the front seat belt anchor plate.

(2) Install the front seat inner belt assembly with the nut. Text in Illustration *a Protruding Part Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat with adjuster frame.

(3) Check that the front seat inner belt rotates smoothly.

(4) Connect the seat position sensor connector.

(5) Engage the 3 clamps.

(b) for Front Passenger Side:

(1) Install the front seat belt anchor plate.

(2) Install the front seat inner belt assembly with the nut. Text in Illustration *a Protruding Part Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat with adjuster frame.

(3) Check that the front seat inner belt rotates smoothly.

(4) Engage the 2 clamps.

(5) Connect the connector.

2. INSTALL FRONT SEAT ASSEMBLY

(a) for Driver Side:

Click here

(b) for Front Passenger Side:

Click here

3. INSTALL SEAT TRACK COVER

(a) for Driver Side:

Click here

(b) for Front Passenger Side:

Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

5. INSPECT SRS WARNING LIGHT

Click here