Installation

1. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

(a) Install a new drum gasket onto the rear brake drum.

(b) Install the rear brake drum.

2. ADJUST REAR DRUM BRAKE SHOE CLEARANCE

(a) Provisionally install the hub nuts.

(b) Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.

(c) Using a screwdriver, release the adjuster 15 notches.

(d) Install the hole plug.

3. FILL RESERVOIR WITH BRAKE FLUID (for Hydraulic Brake Booster)

4. FILL RESERVOIR WITH BRAKE FLUID (for Vacuum Brake Booster)

5. BLEED BRAKE BOOSTER WITH ACCUMULATOR PUMP ASSEMBLY (for Hydraulic Brake Booster)

6. BLEED MASTER CYLINDER (for Vacuum Brake Booster)

7. BLEED BRAKE LINE (for Hydraulic Brake Booster)

8. BLEED BRAKE LINE (for Vacuum Brake Booster)

9. BLEED MASTER CYLINDER SOLENOID (for Hydraulic Brake Booster)

10. BLEED BRAKE ACTUATOR (for Vacuum Brake Booster)

11. INSPECT FLUID LEVEL IN RESERVOIR (for Hydraulic Brake Booster)

12. INSPECT FLUID LEVEL IN RESERVOIR (for Vacuum Brake Booster)

13. INSPECT FOR BRAKE FLUID LEAK

14. INSTALL REAR WHEEL

Torque:

113 N·m {1152 kgf·cm, 83 ft·lbf}

15. INSPECT PARKING BRAKE PEDAL TRAVEL

16. ADJUST PARKING BRAKE PEDAL TRAVEL