Park Assist / Monitoring
Rear Cross Traffic Alert Buzzer
In this manual: Park Assist / Monitoring
~1min read
Components COMPONENTS ILLUSTRATION
Installation INSTALLATION PROCEDURE
Installation INSTALLATION PROCEDURE
1. INSTALL REAR CROSS TRAFFIC ALERT BUZZER
(a) Engage the clamp to install the rear cross traffic alert buzzer.
(b) Connect the connector.
2. INSTALL QUARTER INSIDE TRIM BOARD LH (for Double Cab)
(See page
)
3. INSTALL QUARTER INSIDE TRIM BOARD LH (for Access Cab)
(See page
)
1. REMOVE QUARTER INSIDE TRIM BOARD LH (for Double Cab)
(See page
)
2. REMOVE QUARTER INSIDE TRIM BOARD LH (for Access Cab)
(See page
)
3. REMOVE REAR CROSS TRAFFIC ALERT BUZZER
(a) Disconnect the connector. |
![]() |
(b) Disengage the clamp to remove the rear cross traffic alert buzzer.
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
