Removal

1. REMOVE MANUAL TRANSMISSION ASSEMBLY

(See page )

2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

(a) Remove the clutch release fork sub-assembly with the clutch release bearing assembly from the manual transmission assembly.

(b) Remove the release fork support from the manual transmission assembly.

(c) Remove the clip and clutch release bearing assembly from the clutch release fork sub-assembly.

(d) Remove the clutch release fork collar from the clutch release fork sub-assembly.

(e) Remove the clutch release fork dust seal from the clutch release fork sub-assembly.

3. REMOVE CLUTCH COVER ASSEMBLY

(a) Put matchmarks on the clutch cover assembly and flywheel sub-assembly. Text in Illustration *a Matchmark

(b) Loosen each bolt one turn at a time until spring tension is released.

(c) Remove the 6 bolts and pull off the clutch cover assembly.

NOTICE:

Do not drop the clutch disc assembly.

4. REMOVE CLUTCH DISC ASSEMBLY

NOTICE:

Keep the lining part of the clutch disc assembly, the pressure plate and the surface of the flywheel sub-assembly away from oil and foreign matter.