Toyota Tacoma Quiz
2gr-fks Cooling

Removal

In this manual: 2gr-fks Cooling
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~1min read
REMOVAL PROCEDURE

1. REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

(See page 2. REMOVE NO. 1 RADIATOR HOSE )

2. REMOVE NO. 1 RADIATOR HOSE

3. REMOVE NO. 2 RADIATOR HOSE

3. REMOVE NO. 2 RADIATOR HOSE

4. DISCONNECT RADIATOR RESERVE TANK HOSE

4. DISCONNECT RADIATOR RESERVE TANK HOSE

5. SEPARATE TRANSMISSION OIL COOLER HOSE (for Automatic Transmission)

5. SEPARATE TRANSMISSION OIL COOLER HOSE (for Automatic Transmission)

(a) Disengage the clamp to separate the 2 transmission oil cooler hoses from the fan shroud.

6. REMOVE FAN SHROUD

7. REMOVE COOLER COMPRESSOR ASSEMBLY

7. REMOVE COOLER COMPRESSOR ASSEMBLY

(See page 8. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY 8. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY )

8. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

9. SEPARATE VANE PUMP ASSEMBLY

9. SEPARATE VANE PUMP ASSEMBLY

(a) Remove the 2 bolts and separate the vane pump assembly from the timing chain cover assembly.

10. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

(a) Remove the 2 bolts and 2 No. 2 idler pulley sub-assemblies from the timing chain cover assembly.

Text in Illustration

*A

for LH Side

*B

for RH Side

11. REMOVE ENGINE WATER PUMP ASSEMBLY

(a) Remove the 15 bolts, engine water pump assembly and gasket from the timing chain cover assembly.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.