Removal

1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for Automatic Transmission)

Transmission	See page
AC60E
AC60F

2. REMOVE MANUAL TRANSMISSION ASSEMBLY (for Manual Transmission)

(See page )

3. REMOVE CLUTCH COVER ASSEMBLY (for Manual Transmission)

4. REMOVE CLUTCH DISC ASSEMBLY (for Manual Transmission)

5. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY (for Automatic Transmission)

6. REMOVE FLYWHEEL SUB-ASSEMBLY (for Manual Transmission)

7. REMOVE REAR ENGINE OIL SEAL

(a) Using a knife, cut off the lip of the rear engine oil seal. Text in Illustration *a Cut Position

(b) Using a screwdriver, pry out the rear engine oil seal.

NOTICE:

Do not damage the surface of the rear engine oil seal press fit hole or crankshaft.

HINT:

Tape the screwdriver tip before use.