Automatic Light Control Sensor
ComponentsCOMPONENTSILLUSTRATION
InstallationINSTALLATIONPROCEDURE1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (a) Attach the 2 claws to install the automatic light control sensor. 2. INSTALL NO. 1 SPEAKER HOLE COVER (a) Connect the connector. (b) Attach the 8 clips to install the No. 1 speaker hole cover. On-vehicle InspectionON-VEHICLE INSPECTIONPROCEDURE1. INSPECT AUTOMATIC LIGHT CONTROL SENSOR
(a) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(c) Reconnect the automatic light control sensor connector.
RemovalREMOVALPROCEDURE1. REMOVE NO. 1 SPEAKER HOLE COVER
(a) Put protective tape around the No. 1 speaker hole cover. Text in Illustration
(b) Using moulding remover B, detach the 8 clips. (c) Disconnect the connector and remove the No. 1 speaker hole cover. 2. REMOVE AUTOMATIC LIGHT CONTROL SENSOR
(a) Detach the 2 claws and remove the automatic light control sensor. |
