Engine, Hybrid System
Disassembly
In this manual: Engine, Hybrid System
~1min read
DISASSEMBLYPROCEDURE1. FIX OIL PUMP ASSEMBLY
(a) Place the oil pump body on the torque converter clutch. 2. REMOVE CLUTCH DRUM OIL SEAL RING
(a) Remove the 3 oil seal rings. 3. REMOVE STATOR SHAFT ASSEMBLY
4. REMOVE FRONT OIL PUMP BODY O-RING
(a) Remove the O-ring from the oil pump body. (b) Remove the oil pump body from the torque converter clutch. 5. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY 6. INSPECT STATOR SHAFT ASSEMBLY 7. INSPECT CLEARANCE OF OIL PUMP ASSEMBLY 8. REMOVE FRONT OIL PUMP DRIVE GEAR
9. REMOVE FRONT OIL PUMP DRIVEN GEAR
10. REMOVE FRONT OIL PUMP OIL SEAL
(a) Using a screwdriver, pry out the oil seal. NOTICE: Be careful not to damage the bushing and oil pump body. |
Was this page helpful?

