Engine, Hybrid System
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE SHIFT LEVER CAP
(a) Using a screwdriver, detach the 2 claws and remove the shift lever cap from the upper position indicator housing. Text in Illustration
NOTICE:
Be careful not to damage the shift lever cap.
HINT:
Tape the screwdriver tip before use. |
 |
2. REMOVE UPPER POSITION INDICATOR HOUSING
(a) Detach the 4 claws and remove the upper position indicator housing from the shift lever assembly. |
 |
3. REMOVE POSITION INDICATOR SLIDE COVER
(a) Remove the position indicator slide cover together with the No. 2 position indicator slide cover from the shift lever assembly. |
 |
4. REMOVE NO. 2 POSITION INDICATOR SLIDE COVER
(a) Remove the No. 2 position indicator slide cover from the position indicator slide cover. |
 |
5. DISCONNECT INDICATOR LIGHT WIRE SUB-ASSEMBLY
(a) Using a thin-bladed screwdriver, release the connector housing retainer. Text in Illustration
*1 |
Connector Housing Retainer |
*a |
Component without harness connected
(Transmission Control Switch) |
|
 |
(b) Using a thin-bladed screwdriver, pull out the 4 (ILL+) and 8 (ILL-) terminals from the rear as shown in the illustration.
(c) Detach the 4 guides from the shift lever assembly. |
 |
6. REMOVE LOWER POSITION INDICATOR HOUSING
(a) Using a small screwdriver, detach the 4 claws and remove the lower position indicator housing from the shift lever assembly. Text in Illustration
NOTICE:
Be careful not to damage the lower position indicator housing and shift lever assembly.
HINT:
Tape the screwdriver tip before use. |
 |
7. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
(a) Disconnect the connector and remove the indicator light wire sub-assembly from the lower position indicator housing. |
 |
8. REMOVE POSITION INDICATOR LED
(a) Detach the claw and remove the position indicator LED from the lower position indicator housing. |
 |
9. REMOVE SHIFT LOCK CONTROL ECU
(a) Disconnect the shift lock solenoid connector. |
 |
(b) Detach the 3 claws and remove the shift lock control ECU from the shift lever assembly. |
Was this page helpful?