Power Source, Network
ECU Malfunction (B1003)
DESCRIPTION
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
B1003 |
ECU Malfunction |
A malfunction in the non-volatile storage of the central gateway ECU (network gateway ECU) is detected. |
Central gateway ECU (network gateway ECU) |
PROCEDURE
RECONFIRM DTC OUTPUT
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Central Gateway / Trouble Codes.
Result | Proceed to |
DTC B1003 is not output from the central gateway ECU (network gateway ECU) |
A |
DTC B1003 is output from the central gateway ECU (network gateway ECU) |
B |
| A |
 |
USE SIMULATION METHOD TO CHECK |
| B |
 |
REPLACE CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) |
|
Was this page helpful?