If any of the following conditions are detected while the cruise control system is controlling vehicle speed, the system clears the vehicle speed stored in the ECM and cancels control of vehicle speed by the cruise control system.
Auto Cancel Condition
Warning
Fail-safe Deactivation Condition
Multi-information Display
Master Warning Light
Cruise Control Indicator
Warning Buzzer
Open or short in stop light switch circuit
Cruise Control Malfunction Visit Your Dealer
Illuminates
Does not illuminate
Sounds
Cruise control system is turned off and back on again using the cruise control main switch (ON-OFF button).
Problem with stop light switch input circuit
Problem with cruise control main switch cancel circuit
Malfunction is detected in the vehicle stability control system
Communication stop between skid control ECU (brake actuator assembly) and ECM
Cruise Control Malfunction Visit Your Dealer
Illuminates
Does not illuminate
Sounds
Turn ignition switch off then on again.
If the following condition occurs, the ECM cancels control of vehicle speed by the cruise control system (Stored vehicle speed is maintained):
Vehicle speed is less than approximately 40 km/h while driving with the cruise control system controlling vehicle speed
-
Does not illuminate
Illuminates
-
Cruise control main switch is pushed to +RES
Malfunction is detected in SFI system
-
Illuminates
Does not illuminate
-
Cruise control system is turned off and back on again using the cruise control main switch (ON-OFF button).
Vehicle speed is less than stored vehicle speed by approximately 16 km/h or more
-
Does not illuminate
Illuminates
-
Cruise control main switch is pushed to -SET
Vehicle stability control system operates while driving with cruise control system controlling vehicle speed
TRAC system operates for a certain period of time while driving with cruise control system controlling vehicle speed.