Lost Communication With Vehicle Dynamics Control Module (U0122)
In this manual: Engine, Hybrid System
3steps
~18min
2/5difficulty
Done 0 of 3
DESCRIPTION
The ECM receives signals from the skid control ECU (brake actuator assembly) via CAN communication.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
U0122
Lost Communication with Vehicle Dynamics Control Module
While the vehicle speed is 40 km/h or more and the cruise control main switch (ON-OFF button) is on, signals cannot be received from the skid control ECU (brake actuator assembly) for 2.65 seconds or more.
CAN communication system
ECM
Skid control ECU (brake actuator assembly)
HINT:
Refer to troubleshooting in CAN Communication System.
Click here
PROCEDURE
CHECK FOR DTCs (CRUISE CONTROL SYSTEM)
(a) Clear the DTCs.
Click here
(b) Make sure that the DTC detection conditions are met.
HINT:
If the detection conditions are not met, the system cannot detect the malfunction.
Drive the vehicle at a speed for which cruise control operation is possible.
Turn the cruise control system on using the cruise control main switch (ON-OFF button).
Push the cruise control main switch to -SET to begin control of vehicle speed using the cruise control system.