Floor Speaker(for Crewmax)
ComponentsCOMPONENTSILLUSTRATION
InspectionINSPECTIONPROCEDURE1. INSPECT NO. 1 BOX SPEAKER ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below. Standard resistance:
If the result is not as specified, replace the No. 1 box speaker assembly. Text in Illustration
InstallationINSTALLATIONPROCEDURE1. INSTALL NO. 1 BOX SPEAKER ASSEMBLY (a) Connect the connector.
2. INSTALL REAR SEAT ASSEMBLY RH (See page 3. INSTALL REAR SEAT ASSEMBLY LH (See page RemovalREMOVALPROCEDURE1. REMOVE REAR SEAT ASSEMBLY LH (See page 2. REMOVE REAR SEAT ASSEMBLY RH (See page 3. REMOVE NO. 1 BOX SPEAKER ASSEMBLY
|


