Gauges and meters
![]()
Changing the odometer/trip meter displayPressing the button switches between odometer and trip meter. ![]() ■ Odometer Displays the total distance the vehicle has been driven. ■ Trip meter A*/trip meter B* Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently. *: Press and hold the display change button to reset. Instrument panel light controlThe brightness of the instrument panel lights can be adjusted. Pressing the button will adjust brightness of the instrument panel light. The brightness of the instrument panel lights can be adjusted by pressing the button. Short press: 1 step change of brightness level. Long press: continues change of brightness level until released. ![]() ■The multi-information display illuminate when The engine switch is in the "ON" position. ■The brightness of the instrument panel lights When the tail lights are turned on, the display's brightness will be reduced slightly unless the meter brightness level adjustment is set to the brightest setting. ■Outside temperature display
■Liquid crystal display Small spots or light spots may appear on the display. This phenomenon is characteristic of liquid crystal displays, and there is no problem continuing to use the display. WARNING■The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver's shifting and the new gear number appearing on the display. This lag could cause the driver to downshift again, causing rapid and excessive engine braking and possibly an accident resulting in personal death or injury. NOTICE■To prevent damage to the engine and its components
■Voltmeter When the voltmeter indicates 19 V or higher or 9 V or lower while the engine is running, there may be a battery or charging system malfunction. Have the vehicle inspected at your Toyota dealer. ■Engine oil pressure gauge When the value of the engine oil pressure gauge drops while the engine is running, stop the vehicle in a safe place immediately and check the amount of engine oil. When the oil pressure drops even though the engine oil amount has not decreased, or if the oil pressure does not increase when engine oil is added, contact your Toyota dealer, as there may be a problem with the lubrication system. |


