Vehicle Interior

How To Proceed With Troubleshooting

~1min read

HINT:

  • Use the following procedures to troubleshoot the power mirror control system.
  • *: Use the ECU.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. INSPECT BATTERY VOLTAGE

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT
  1. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Use the Techstream to check if the CAN communication system is functioning normally.

Click here

Result

Proceed to

CAN DTC is not output

A

CAN DTC is output

B

B

GO TO CAN COMMUNICATION SYSTEM

A
  1. PROBLEM SYMPTOMS TABLE

Result

Proceed to

Fault is not listed in problem symptoms table

A

Fault is listed in problem symptoms table

B

B

GO TO STEP 6

A
  1. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check

Click here

(b) DATA LIST / ACTIVE TEST

Click here

(c) Terminals of ECU

Click here

NEXT
  1. ADJUST, REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END