How To Proceed With Troubleshooting
|
HINT:
PROCEDURE
Standard Voltage: 11 to 14 V If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
(a) Check for DTCs and make a note of any codes that are output. (b) Clear the DTCs. (c) Recheck for DTCs. Based on the DTCs output above, try to cause the output of the same CAN system DTC, airbag system DTC or occupant classification system DTC by simulating the symptoms indicated by the DTC.
(a) Refer to the problem symptoms table. Click here
(a) Operation check Click here (b) Data List / Active Test Click here (c) Terminals of ECU Click here
|