Vehicle Interior
Inspection
INSPECTION
PROCEDURE
1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY) (for Regular Cab)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
Tester Connection | Switch Condition | Specified Condition |
1 (L) - 7 (E) |
Lock |
Below 1 Ω |
1 (L) - 7 (E) |
OFF |
10 kΩ or higher |
9 (UL) - 7 (E) |
9 (UL) - 7 (E) |
Unlock |
Below 1 Ω |
If the result is not as specified, replace the power window regulator master switch assembly (door control switch assembly). Text in Illustration
*a |
Component without harness connected
(Power Window Regulator Master Switch Assembly (Door Control Switch Assembly)) |
*b |
Unlock |
*c |
Lock |
|
 |
2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY) (for Double Cab, for Crew Max)
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
Tester Connection | Switch Condition | Specified Condition |
2 (L) - 1 (E) |
Lock |
Below 1 Ω |
2 (L) - 1 (E) |
OFF |
10 kΩ or higher |
9 (UL) - 1 (E) |
9 (UL) - 1 (E) |
Unlock |
Below 1 Ω |
If the result is not as specified, replace the power window regulator master switch assembly (door control switch assembly). Text in Illustration
*a |
Component without harness connected
(Power Window Regulator Master Switch Assembly (Door Control Switch Assembly)) |
*b |
Unlock |
*c |
Lock |
|
 |
|
Was this page helpful?