INSPECTION
PROCEDURE
1. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (w/o Jam Protection Function)
(a) Apply battery voltage to connector terminals 1 and 2. |
 |
(b) Apply battery voltage to the regulator motor and check the operation of the front power window regulator motor assembly LH.
OK:
Measurement Condition | Specified Condition |
Battery positive (+) → 1
Battery negative (-) → 2 |
Motor gear rotates counterclockwise |
Battery positive (+) → 2
Battery negative (-) → 1 |
Motor gear rotates clockwise |
- If the result is not as specified, replace the front power window regulator motor assembly LH. Text in Illustration
*1 |
Motor Gear |
*a |
Component without harness connected
(Front Power Window Regulator Motor Assembly LH) |
*b |
Clockwise |
*c |
Counterclockwise |
2. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (w/ Jam Protection Function)
NOTICE:
- Do not apply positive (+) battery voltage to any terminals except terminal 2, to avoid damaging the pulse sensor inside the motor.
- Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly to the door.
(a) Apply battery voltage to the regulator motor and check the operation of the front power window regulator motor assembly LH.
OK:
Measurement Condition | Motor Condition | Specified Condition |
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1, 4 and 10 |
Auto |
Motor gear rotates clockwise |
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1, 4 and 7 |
Motor gear rotates counterclockwise |
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1 and 10 |
Manual |
Motor gear rotates clockwise |
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1 and 7 |
Motor gear rotates counterclockwise |
If the result is not as specified, replace the front power window regulator motor assembly LH. Text in Illustration
*1 |
Motor Gear |
*a |
Component without harness connected
(Front Power Window Regulator Motor Assembly LH) |
*b |
Clockwise |
*c |
Counterclockwise |
3. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (w/o Jam Protection Function)
(a) Apply battery voltage to connector terminals 1 and 2. |
 |
(b) Apply battery voltage to the regulator motor and check the operation of the front power window regulator motor assembly RH.
OK:
Measurement Condition | Specified Condition |
Battery positive (+) → 1
Battery negative (-) → 2 |
Motor gear rotates clockwise |
Battery positive (+) → 2
Battery negative (-) → 1 |
Motor gear rotates counterclockwise |
- If the result is not as specified, replace the front power window regulator motor assembly RH. Text in Illustration
*1 |
Motor Gear |
*a |
Component without harness connected
(Front Power Window Regulator Motor Assembly RH) |
*b |
Clockwise |
*c |
Counterclockwise |
4. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (w/ Jam Protection Function)
NOTICE:
- Do not apply positive (+) battery voltage to any terminals except terminal 2, to avoid damaging the pulse sensor inside the motor.
- Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly to the door.
(a) Apply battery voltage to the regulator motor and check the operation of the front power window regulator motor assembly RH.
OK:
Measurement Condition | Motor Condition | Specified Condition |
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1, 4 and 7 |
Auto |
Motor gear rotates clockwise |
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1, 4 and 10 |
Motor gear rotates counterclockwise |
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1 and 7 |
Manual |
Motor gear rotates clockwise |
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1 and 10 |
Motor gear rotates counterclockwise |
If the result is not as specified, replace the front power window regulator motor assembly RH. Text in Illustration
*1 |
Motor Gear |
*a |
Component without harness connected
(Front Power Window Regulator Motor Assembly RH) |
*b |
Clockwise |
*c |
Counterclockwise |
|