Vehicle Interior
Inspection
INSPECTION
PROCEDURE
1. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for Double Cab)
(a) Apply battery voltage to connector terminals 1 and 2. |
 |
(b) Check that the motor gear rotates smoothly as follows.
OK:
Measurement Condition | Specified Condition |
Battery positive (+) → 1
Battery negative (-) → 2 |
Motor gear rotates counterclockwise |
Battery positive (+) → 2
Battery negative (-) → 1 |
Motor gear rotates clockwise |
- If the result is not as specified, replace the rear power window regulator motor assembly LH. Text in Illustration
*1 |
Motor Gear |
*a |
Component without harness connected
(Rear Power Window Regulator Motor Assembly LH) |
*b |
Clockwise |
*c |
Counterclockwise |
2. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for CrewMax)
(a) Apply battery voltage to connector terminals 1 and 2. |
 |
(b) Check that the motor gear rotates smoothly as follows.
OK:
Measurement Condition | Specified Condition |
Battery positive (+) → 1
Battery negative (-) → 2 |
Motor gear rotates counterclockwise |
Battery positive (+) → 2
Battery negative (-) → 1 |
Motor gear rotates clockwise |
- If the result is not as specified, replace the rear power window regulator motor assembly LH. Text in Illustration
*1 |
Motor Gear |
*a |
Component without harness connected
(Rear Power Window Regulator Motor Assembly LH) |
*b |
Clockwise |
*c |
Counterclockwise |
3. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for Double Cab)
(a) Apply battery voltage to connector terminals 1 and 2. |
 |
(b) Check that the motor gear rotates smoothly as follows.
OK:
Measurement Condition | Specified Condition |
Battery positive (+) → 1
Battery negative (-) → 2 |
Motor gear rotates counterclockwise |
Battery positive (+) → 2
Battery negative (-) → 1 |
Motor gear rotates clockwise |
- If the result is not as specified, replace the rear power window regulator motor assembly RH. Text in Illustration
*1 |
Motor Gear |
*a |
Component without harness connected
(Rear Power Window Regulator Motor Assembly RH) |
*b |
Clockwise |
*c |
Counterclockwise |
4. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH (for CrewMax)
(a) Apply battery voltage to connector terminals 1 and 2. |
 |
(b) Check that the motor gear rotates smoothly as follows.
OK:
Measurement Condition | Specified Condition |
Battery positive (+) → 1
Battery negative (-) → 2 |
Motor gear rotates clockwise |
Battery positive (+) → 2
Battery negative (-) → 1 |
Motor gear rotates counterclockwise |
- If the result is not as specified, replace the rear power window regulator motor assembly RH. Text in Illustration
*1 |
Motor Gear |
*a |
Component without harness connected
(Rear Power Window Regulator Motor Assembly RH) |
*b |
Clockwise |
*c |
Counterclockwise |
|
Was this page helpful?