Vehicle Interior

Installation

~1min read
0102030405012.59N·mlb·ft
Tightening torque found on this page

INSTALLATION

HINT:

  • Use the same procedures for the LH side and RH side.
  • The procedures listed below are for the LH side.

PROCEDURE

1. INSTALL REAR SEAT OUTER BELT ASSEMBLY

(a) Align the vehicle's claws with the seat belt retractor positioning holes.

(b) Install the seat belt with the 2 bolts.

HINT:

First install bolt A, and then install bolt B.

Torque:

for bolt A :

12,5 N·m {127 kgf·cm, 9 ft·lbf}

for bolt B :

42 N·m {428 kgf·cm, 31 ft·lbf}

(c) Install the shoulder anchor with the bolt.

Torque:

42 N·m {428 kgf·cm, 31 ft·lbf}

2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY

3. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY

(a) Attach the 6 clips to install the quarter trim panel lower.

(b) Install the seat belt anchor with the bolt.

Torque:

42 N·m {428 kgf·cm, 31 ft·lbf}

(c) Attach the 2 claws to install the cover.

4. INSTALL REAR DOOR SCUFF PLATE

5. INSTALL REAR SEAT ASSEMBLY

(a) Install the rear seat (see page ).