LDA (Lane Departure Alert)
Summary of functionsWhen driving on roads with white (yellow) lines, this function alerts the driver when the vehicle might depart from its lane. The LDA system recognizes visible white (yellow) lines with the camera sensor on the upper portion of the windshield. ![]() Functions included in LDA systemLane departure alert functionWhen the system determines that the vehicle might depart from its lane, a warning is displayed on the multi-information display and the warning buzzer sounds to alert the driver. When the warning buzzer sounds, check the surrounding road situation and carefully operate the steering wheel to move the vehicle back to the center of the lane. ![]() Vehicle sway warningWhen the vehicle is swaying or appears as if it may depart from its lane multiple times, the warning buzzer sounds and a message is displayed on the multi-information display to alert the driver. ![]() ■Before using LDA system Do not rely solely upon the LDA system. The LDA system does not automatically drive the vehicle or reduce the amount of attention that must be paid to the area in front of the vehicle. The driver must always assume full responsibility for driving safely by always paying careful attention to the surrounding conditions and operating the steering wheel to correct the path of the vehicle. Also, the driver must take adequate breaks when fatigued, such as from driving for a long period of time. Failure to perform appropriate driving operations and pay careful attention may lead to an accident, resulting in death or serious injury. ■To avoid operating LDA system by mistake When not using the LDA system, use the LDA switch to turn the system off. ■Situations unsuitable for LDA system Do not use the LDA system in the following situations. The system may not operate properly and lead to an accident, resulting in death or serious injury.
■Preventing LDA system malfunctions and operations performed by mistake
Turning LDA system onPress the LDA switch to turn the LDA system on. The LDA indicator illuminates and a message is displayed on the multi-information display. Press the LDA switch again to turn the LDA system off. When the LDA system is turned on or off, operation of the LDA system continues in the same condition the next time the engine is started. ![]() Indications on multi-information display
Inside of displayed white lines is white ![]() Indicates that the system is recognizing white (yellow) lines. When the vehicle departs from its lane, the white line displayed on the side the vehicle departs from flashes orange. Inside of displayed white lines is black ![]() Indicates that the system is not able to recognize white (yellow) lines or is temporarily canceled. ■Operation conditions of each function
■Temporary cancellation of functions When the operation conditions are no longer met, a function may be temporarily canceled. However, when the operation conditions are met again, operation of the function is automatically restored. ■Lane departure alert function The warning buzzer may be difficult to hear due to external noise, audio playback, etc. ■Vehicle sway warning function When the system determines that the vehicle is swaying while the vehicle sway warning function is operating, a buzzer sounds and a warning message urging the driver to rest and the symbol shown in the illustration are simultaneously displayed on the multi-information display. ![]() Depending on the vehicle and road conditions, the warning may not operate. ■White (yellow) lines are only on one side of road The LDA system will not operate for the side on which white (yellow) lines could not be recognize ■Conditions in which functions may not operate properly In the following situations, the camera sensor may not detect white (yellow) lines and various functions may not operate normally.
■Warning message Warning messages are used to indicate a system malfunction or to inform the driver of the need for caution while driving. ■Customization The following settings can be changed.
|







