The pre-collision system uses a radar sensor and camera sensor to detect vehicles and pedestrians in front of your vehicle.
When the system determines that the possibility of a frontal collision with a vehicle or pedestrian is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision. If the system determines that the possibility of a frontal collision with a vehicle or pedestrian is extremely high, the brakes are automatically applied to help avoid the collision or help reduce the impact of the collision.
The pre-collision system can be disabled/enabled and the warning timing can be changed.
Pre-collision warning
When the system determines that the possibility of a frontal collision is high, a buzzer will sound and a warning message will be displayed on the multi-information display to urge the driver to take evasive action.
Pre-collision brake assist
When the system determines that the possibility of a frontal collision is high, the system applies greater braking force in relation to how strongly the brake pedal is depressed.
Pre-collision braking
When the system determines that the possibility of a frontal collision is high, the system warns the driver. If the system determines that the possibility of a frontal collision is extremely high, the brakes are automatically applied to help avoid the collision or reduce the collision speed.
WARNING
■Limitations of the pre-collision system
The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings.
Do not use the pre-collision system instead of normal braking operations under any circumstances. This system will not prevent collisions or lessen collision damage or injury in every situation. Do not overly rely on this system.
Failure to do so may lead to an accident, resulting in death or serious injury.
Although this system is designed to help avoid a collision or help reduce the impact of the collision, its effectiveness may change according to various conditions, therefore the system may not always be able to achieve the same level of performance.
Read the following conditions carefully. Do not overly rely on this system and always drive carefully.
Conditions under which the system may operate even if there is no possibility of a collision
Conditions under which the system may not operate properly
Do not attempt to test the operation of the pre-collision system yourself, as the system may not operate properly, possibly leading to an accident.
■Pre-collision braking
When the pre-collision braking function is operating, a large amount of braking force will be applied.
If the vehicle is stopped by the operation of the pre-collision braking function, the pre-collision braking function operation will be canceled after approximately 2 seconds. Depress the brake pedal as necessary.
The pre-collision braking function may not operate if certain operations are performed by the driver. If the accelerator pedal is being depressed strongly or the steering wheel is being turned, the system may determine that the driver is taking evasive action and possibly prevent the pre-collision braking function from operating.
In some situations, while the pre-collision braking function is operating, operation of the function may be canceled if the accelerator pedal is depressed strongly or the steering wheel is turned and the system determines that the driver is taking evasive action.
If the brake pedal is being depressed, the system may determine that the driver is taking evasive action and possibly delay the operation timing of the pre-collision braking function.
WARNING
■When to disable the pre-collision system In the following situations, disable the system, as it may not operate properly, possibly leading to an accident resulting in death or serious injury:
When the vehicle is being towed
When your vehicle is towing another vehicle
When transporting the vehicle via truck, boat, train or similar means of transportation
When the vehicle is raised on a lift with the engine running and the tires are allowed to rotate freely
When inspecting the vehicle using a drum tester such as a chassis dynamometer or speedometer tester, or when using an on vehicle wheel balancer
When a strong impact is applied to the front bumper or front grille, due to an accident or other reasons
If the vehicle cannot be driven in a stable manner, such as when the vehicle has been in an accident or is malfunctioning
When the vehicle is driven in a sporty manner or off-road
When the tires are not properly inflated
When the tires are very worn
When tires of a size other than specified are installed
When tire chains are installed
When a compact spare tire or an emergency tire puncture repair kit is used
If equipment (snow plow, etc.) that may obstruct the radar sensor or camera sensor is temporarily installed to the vehicle
Changing settings of the pre-collision system
■ Enabling/disabling the pre-collision system The pre-collision system can be enabled/disabled on the multi-information display as following: The system is automatically enabled each time the engine switch is turned to the "ON" position.
1. Press "" or "" of meter control switches and select .
2. Press "" or "" of meter control switches and select "PCS", and press .
3. Press "" or "" of meter control switches and select "PCS", and press to select the desired setting (on/off).
If the system is disabled, the PCS warning light will turn on and a message will be displayed on the multi-information display.
■ Changing the pre-collision warning timing The pre-collision warning timing can be changed on the multi-information display as following: The operation timing setting is retained when the engine switch is turned off.
1. Press "" or "" of meter control switches and select .
2. Press "" or "" of meter control switches and select "PCS", and press .
3. Press "" or "" of meter control switches and select "Sensitivity", and press to select the desired setting.
Far The warning will begin to operate earlier than with the default timing.
Middle This is the default setting.
Near The warning will begin to operate later than with the default timing.
■Operational conditions The pre-collision system is enabled and the system determines that the possibility of a frontal collision with a vehicle or pedestrian is high.
Each function is operational at the following speeds:
Pre-collision warning:
Vehicle speed is between approximately 7 and 180 km/h.
(For detecting a pedestrian, vehicle speed is between approximately 7 and 50 mph [10 and 80 km/h].)
The relative speed between your vehicle and the vehicle or pedestrian ahead is approximately 10 km/h or more.
Pre-collision brake assist:
Vehicle speed is between approximately 20 and 180 km/h.
(For detecting a pedestrian, vehicle speed is between approximately 20 and 50 mph [30 and 80 km/h].)
The relative speed between your vehicle and the vehicle or pedestrian ahead is approximately 30 km/h or more.
Pre-collision braking:
Vehicle speed is between approximately 7 and 180 km/h.
(For detecting a pedestrian, vehicle speed is between approximately 7 and 50 mph [10 and 80 km/h].)
The relative speed between your vehicle and the vehicle or pedestrian ahead is approximately 10 km/h or more.
The system may not operate in the following situations:
If a battery terminal has been disconnected and reconnected and then the vehicle has not been driven for a certain amount of time
If the shift lever is in R
If VSC is disabled (only the pre-collision warning function will be operational)
If the low speed four-wheel drive indicator is illuminated (only the pre-collision warning function will be operational)
■Pedestrian detection function The pre-collision system detects pedestrians based on the size, profile, and motion of a detected object. However, a pedestrian may not be detected depending on the surrounding brightness and the motion, posture, and angle of the detected object, preventing the system from operating properly.
■Cancellation of the pre-collision braking If either of the following occur while the pre-collision braking function is operating, it will be canceled:
The accelerator pedal is depressed strongly.
The steering wheel is turned sharply or abruptly.
■Conditions under which the system may operate even if there is no possibility of a collision
In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate.
When passing a vehicle or pedestrian
When changing lanes while overtaking a preceding vehicle
When overtaking a preceding vehicle that is changing lanes
When overtaking a preceding vehicle that is making a left/right turn
When passing a vehicle in an oncoming lane that is stopped to make a right/left turn
When driving on a road where relative location to vehicle ahead in an adjacent lane may change, such as on a winding road
When rapidly closing on a vehicle ahead
If the front of the vehicle is raised or lowered, such as when the road surface is uneven or undulating
When approaching objects on the roadside, such as guardrails, utility poles, trees, or walls
When there is a vehicle, pedestrian, or object by the roadside at the entrance of a curve
When driving on a narrow path surrounded by a structure, such as in a tunnel or on an iron bridge
When there is a metal object (manhole cover, steel plate, etc.), steps, or a protrusion on the road surface or roadside
When a crossing pedestrian approaches very close to the vehicle
When passing through a place with a low structure above the road (low ceiling, traffic sign, etc.)
When passing under an object (billboard, etc.) at the top of an uphill road
When rapidly closing on an electric toll gate barrier, parking area barrier, or other barrier that opens and closes
When using an automatic car wash
When driving through or under objects that may contact the vehicle, such as thick grass, tree branches, or a banner
When the vehicle is hit by water, snow, dust, etc., from a vehicle ahead
When driving through steam or smoke
When there are patterns or paint on the road or a wall that may be mistaken for a vehicle or pedestrian
When driving near an object that reflects radio waves, such as a large truck or guardrail
When driving near a TV tower, broadcasting station, electric power plant, or other location where strong radio waves or electrical noise may be present
■Situations in which the system may not operate properly
In some situations such as the following, a vehicle may not be detected by the radar sensor and camera sensor, preventing the system from operating properly:
If an oncoming vehicle is approaching your vehicle
If a vehicle ahead is a motorcycle or bicycle
When approaching the side or front of a vehicle
If a preceding vehicle has a small rear end, such as an unloaded truck
If a preceding vehicle has a low rear end, such as a low bed trailer
If a vehicle ahead is carrying a load which protrudes past its rear bumper
If a vehicle ahead has extremely high ground clearance
If a vehicle ahead is irregularly shaped, such as a tractor or side car
If the sun or other light is shining directly on a vehicle ahead
If a vehicle cuts in front of your vehicle or emerges from beside a vehicle
If a vehicle ahead makes an abrupt maneuver (such as sudden swerving, acceleration or deceleration)
When suddenly cutting behind a preceding vehicle
When a vehicle ahead is not directly in front of your vehicle
When driving in inclement weather such as heavy rain, fog, snow or a sandstorm
When the vehicle is hit by water, snow, dust, etc., from a vehicle ahead
When driving through steam or smoke
When driving in a place where the surrounding brightness changes suddenly, such as at the entrance or exit of a tunnel
When a very bright light, such as the sun or the headlights of oncoming traffic, shines directly into the camera sensor
When the surrounding area is dim, such as at dawn or dusk, or while at night or in a tunnel
After the engine has started the vehicle has not been driven for a certain amount of time
While making a left/right turn and for a few seconds after making a left/ right turn
While driving on a curve and for a few seconds after driving on a curve
If your vehicle is skidding
If the front of the vehicle is raised or lowered
If the wheels are misaligned
If a wiper blade is blocking the camera sensor
The vehicle is wobbling.
The vehicle is being driven at extremely high speeds.
When driving on a hill
If the radar sensor or camera sensor is misaligned
In some situations such as the following, sufficient braking force may not be obtained, preventing the system from performing properly:
If the braking functions cannot operate to their full extent, such as when the brake parts are extremely cold, extremely hot, or wet
If the vehicle is not properly maintained (brakes or tires are excessively worn, improper tire inflation pressure, etc.)
When the vehicle is being driven on a gravel road or other slippery surface
Some pedestrians such as the following may not be detected by the radar sensor and camera sensor, preventing the system from operating properly:
Pedestrians shorter than approximately 3.2 ft. (1 m) or taller than approximately 6.5 ft. (2 m)
Pedestrians wearing oversized clothing (a rain coat, long skirt, etc.), making their silhouette obscure
Pedestrians who are carrying large baggage, holding an umbrella, etc., hiding part of their body
Pedestrians who are bending forward or squatting
Pedestrians who are pushing a stroller, wheelchair, bicycle or other vehicle
Groups of pedestrians which are close together
Pedestrians who are wearing white and look extremely bright
Pedestrians in the dark, such as at night or while in a tunnel
Pedestrians whose clothing appears to be nearly the same color or brightness as their surroundings
Pedestrians near walls, fences, guardrails, or large objects
Pedestrians who are on a metal object (manhole cover, steel plate, etc.) on the road
Pedestrians who are walking fast
Pedestrians who are changing speed abruptly
Pedestrians running out from behind a vehicle or a large object
Pedestrians who are extremely close to the side of the vehicle (outside rear view mirror, etc.)
■If the PCS warning light flashes or illuminates, and a warning message is displayed on the multi-information display The pre-collision system may be temporarily unavailable or there may be a malfunction in the system.
In the following situations, the warning light will turn off, the message will disappear and the system will become operational when normal operating conditions return:
When the radar sensor or camera sensor or the area around either sensor is hot, such as in the sun
When the radar sensor or camera sensor or the area around either sensor is cold, such as in an extremely cold environment
When the radar sensor or front grille emblem is dirty or covered with snow, etc.
When the part of the windshield in front of the camera sensor is fogged up or covered with condensation or ice
If the camera sensor is obstructed, such as when the hood is open or a sticker is attached to the windshield near the camera sensor
If the PCS warning light continues to flash or illuminate, or the warning message does not disappear, the system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately.
■If VSC is disabled
If VSC is disabled, the pre-collision brake assist and pre-collision braking functions are also disabled.
The PCS warning light will turn on and "VSC Turned Off Pre-Collision Brake System Unavailable" will be displayed on the multi-information display.