Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL REAR BUMPER UPPER COVER LH
(a) Install the rear bumper upper cover LH with the 2 nuts.
Torque:
30 N·m {306 kgf·cm, 22 ft·lbf}
2. INSTALL REAR BUMPER UPPER COVER RH
HINT:
Use the same procedure described for the LH side.
3. INSTALL REAR BUMPER BAR LH
(a) Install the rear bumper bar LH with the 5 bolts.
Torque:
30 N·m {306 kgf·cm, 22 ft·lbf}
4. INSTALL REAR BUMPER BAR RH
HINT:
Use the same procedure described for the LH side.
5. INSTALL REAR BUMPER PLATE
(a) Install the rear bumper plate with the 2 bolts.
Torque:
30 N·m {306 kgf·cm, 22 ft·lbf}
6. INSTALL NO. 2 FRAME WIRE
(a) w/ Towing Package:
(1) Attach all the clamps to install the No. 2 frame wire to the receiver hitch bracket sub-assembly.
(b) w/o Towing Package:
(1) Attach all the clamps to install the No. 2 frame wire to the rear bumper reinforcement sub-assembly.
7. INSTALL NO. 3 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

8. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System)

9. INSTALL NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

10. INSTALL REAR BUMPER BAR CORNER REINFORCEMENT LH
(a) Install the rear bumper bar corner reinforcement LH with the 5 bolts.
Torque:
30 N·m {306 kgf·cm, 22 ft·lbf}
11. INSTALL REAR BUMPER BAR CORNER REINFORCEMENT RH
HINT:
Use the same procedure described for the LH side.
12. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH

13. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH
HINT:
Use the same procedure described for the LH side.
14. INSTALL REAR BUMPER PAD SUB-ASSEMBLY LH
(a) Attach the 12 claws and 2 guides to install a new rear bumper pad sub-assembly LH.
(b) Install the 3 clips.
15. INSTALL REAR BUMPER PLATE LH
(a) Attach the 3 claws and clip to install a new rear bumper plate LH.
16. INSTALL REAR BUMPER PLATE RH
HINT:
Use the same procedure described for the LH side.