Engine, Hybrid System
Reassembly
REASSEMBLY
HINT:
Perform "Inspection After Repairs" after replacing the fuel pump (See page ).
PROCEDURE
1. INSTALL FUEL PUMP
HINT:
Perform "Inspection After Repairs" after replacing the fuel pump (See page ).
(a) Install the fuel pump harness. |
 |
(b) Apply a light coat of gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump. |
 |
(c) Attach the 5 claws to the claw holes and install the fuel pump and suction plate with filter. |
 |
2. INSTALL SUB TANK
(a) Attach the 2 claws to the claw holes and install the fuel sub tank. |
 |
(b) Attach the 3 claws to the claw holes. |
 |
(c) Connect the fuel tube. |
 |
(d) Install the tube part to the sub tank.
(1) Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the fuel sub tank. |
 |
(e) Connect the fuel pump connector. |
 |
3. INSTALL FUEL SENDER GAUGE ASSEMBLY
 |
Was this page helpful?