Engine, Hybrid System

Removal

~1min read
8special tools

REMOVAL

HINT:

  • Use the same procedures for the RH side and LH side.
  • The procedures listed below are for the LH side.

PROCEDURE

1. REMOVE FRONT WHEEL

2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

3. DISCONNECT FRONT SHOCK ABSORBER WITH COIL SPRING LH

(a) Remove the nut and bolt, and disconnect the shock absorber from the lower side.

4. DISCONNECT FRONT LOWER BALL JOINT ATTACHMENT LH

(a) Remove the 2 bolts and disconnect the attachment from the steering knuckle.

5. REMOVE FRONT NO. 1 SUSPENSION ARM SUB-ASSEMBLY LOWER LH

(a) Place matchmarks on the No. 2 camber adjusting cam and No. 2 toe adjusting plate.

(b) Remove the nut, washer, No. 2 camber adjusting cam, camber adjusting cam assembly, bolt, toe adjusting cam, No. 2 toe adjusting plate and front No. 1 suspension arm lower LH.

6. REMOVE FRONT LOWER BALL JOINT ATTACHMENT LH

(a) Remove the cotter pin and nut.

(b) Using SST, remove the lower ball joint attachment.

SST: 09950-40011

09951-04010

09953-04020

09954-04010

09955-04031

09958-04011

09952-04010

SST: 09955-04090

HINT:

Claw A 09955-04090

Claw B 09955-04031