Customize Parameters
1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Customize.
(e) Select the setting by referring to the table below.
Power WindowTester Display | Default | Content | Setting |
|---|---|---|---|
P Window Auto Up |
Avail |
This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side). |
Avail or Not Avl |
P Window Auto Up From Driver |
Avail |
This function is used to enable or disable the remote auto up function for the front passenger door window using the master switch. |
Avail or Not Avl |
RR Window Auto Up |
Avail |
This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH. |
Avail or Not Avl |
RR Window Auto Up From Driver |
Avail |
This function is used to enable or disable the remote auto up function for the rear RH door window using the master switch. |
Avail or Not Avl |
RL Window Auto Up |
Avail |
This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH. |
Avail or Not Avl |
RL Window Auto Up From Driver |
Avail |
This function is used to enable or disable the remote auto up function for the rear LH door window using the master switch. |
Avail or Not Avl |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.