Customize Parameters
1. CUSTOMIZE METER / GAUGE SYSTEM
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Warning.
(5) Select the setting by referring to the table below.
NOTICE:
- Be sure to record the current value before customizing.
Tester Display | Default | Content | Setting |
|---|---|---|---|
Key Remind Volume |
Large |
Function to change the volume of the key reminder buzzer. |
Large, Medium, Small |
Key Remind Sound |
Normal |
Function to change the frequency of the key reminder buzzer. |
Normal, Slow, Fast |
Driver Side Seatbelt Warning Buzzer*1 |
ON |
Function to turn on/off the seat belt warning buzzer. |
ON or OFF |
Front Passenger Side Seatbelt Warning Buzzer*1 |
ON |
Function to turn on/off the seat belt warning buzzer. |
ON or OFF |
- *1: This setting is only valid for the buzzer which sounds at 20 km/h or more.
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.