1ar-fe Emission Control
Fuel Tank Cap
In this manual: 1ar-fe Emission Control
~1min read
Inspection INSPECTION PROCEDURE
1. INSPECT FUEL TANK CAP ASSEMBLY
(a) Visually check that the fuel tank cap assembly and gasket are not deformed or damaged. Text in Illustration
If the result is not as specified, replace the fuel tank cap assembly. |
![]() |
(b) Confirm that ID mark S is printed on the fuel tank cap assembly. Text in Illustration
CAUTION: Make sure to use a fuel tank cap assembly that has the same ID mark, or a malfunction may occur in the fuel system. |
![]() |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?

