Wiper / Washer
How To Proceed With Troubleshooting
In this manual: Wiper / Washer
~1min read
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the wiper and washer system.
PROCEDUREVEHICLE BROUGHT TO WORKSHOP
|
CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK
|
INSPECT BATTERY VOLTAGE
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
|
PROBLEM SYMPTOMS TABLE
Result | Proceed to |
|---|---|
Fault is not listed in problem symptoms table |
A |
Fault is listed in problem symptom stable |
B |
| B | ![]() | GO TO STEP 6 |
|
OVERALL ANALYSIS AND TROUBLESHOOTING
(a) Inspection
(b) On-vehicle inspection
|
ADJUST, REPAIR OR REPLACE
|
CONFIRMATION TEST
| NEXT | ![]() | END |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.gif)
.gif)