Installation

1. INSTALL TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)

2. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

3. INSTALL NO. 1 BACK DOOR EMBLEM

4. INSTALL NO. 2 BACK DOOR NAME PLATE

5. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

(a) Install the 5 stud bolts and 5 new gaskets to the back door outside garnish sub-assembly.

(b) Install 16 new clips (back door moulding clip) to the back door outside garnish sub-assembly.

(c) Engage the 16 clips to install the back door outside garnish sub-assembly.

(d) Install the 5 nuts.

(e) Connect each connector.

6. INSTALL REAR LIGHT ASSEMBLY LH

7. INSTALL REAR LIGHT ASSEMBLY RH

HINT:

Use the same procedure for the RH side and LH side.

8. INSTALL REAR WIPER MOTOR AND BRACKET ASSEMBLY

9. INSTALL REAR WIPER MOTOR GROMMET

10. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY

11. INSTALL REAR WIPER ARM HEAD CAP

12. INSTALL BACK DOOR PANEL TRIM ASSEMBLY