Toyota Venza Quiz
Exterior Panels / Trim

Installation

In this manual: Exterior Panels / Trim
Introduction — 15Maintenance — 8Audio / Video — 102Garage Door Opener — 8Navigation / Multi Info Display — 81Park Assist / Monitoring — 50Brake (front) — 7Brake (rear) — 7Brake Control / Dynamic Control Systems — 79Brake System (other) — 28Parking Brake — 22Axle And Differential — 44Drive Shaft / Propeller Shaft — 24Mf1a Transfer / 4wd / Awd — 46U660e Automatic Transmission / Transaxle — 1241ar-fe Cooling — 311ar-fe Emission Control — 101ar-fe Engine Control — 1331ar-fe Engine Mechanical — 441ar-fe Fuel — 311ar-fe Intake / Exhaust — 211ar-fe Lubrication — 111ar-fe Starting — 16Cruise Control — 241ar-fe Battery / Charging — 162gr-fe Battery / Charging — 17Networking — 67Power Distribution — 8Power Assist Systems — 34Steering Column — 37Steering Gear / Linkage — 29Alignment / Handling Diagnosis — 4Front Suspension — 39Rear Suspension — 35Tire / Wheel — 4Tire Pressure Monitoring — 35Door / Hatch — 83Exterior Panels / Trim — 56Horn — 4Lighting (ext) — 89Mirror (ext) — 36Sliding Roof / Convertible — 26Window / Glass — 87Wiper / Washer — 30Door Lock — 85Heating / Air Conditioning — 82Interior Panels / Trim — 20Lighting (int) — 37Meter / Gauge / Display — 41Mirror (int) — 9Power Outlets (int) — 10Seat — 84Seat Belt — 43Supplemental Restraint Systems — 131Theft Deterrent / Keyless Entry — 155
~1min read
INSTALLATION PROCEDURE

1. INSTALL FRONT BUMPER ASSEMBLY

(a) Connect each connector.

(b) Engage the 4 claws to install the front bumper assembly.

HINT:

Use the same procedure for the RH side and LH side.

(c) Install the clip.

(d) Install the 2 bolts and 8 screws.

(e) Install the 2 pin hold clips.

Text in Illustration

*1

Correct

*2

Incorrect

NOTICE:

Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

HINT:

Use the same procedure for the RH side and LH side.

2. INSTALL RADIATOR GRILLE


3. INSTALL COOL AIR INTAKE DUCT SEAL

(a) Install the cool air intake duct seal with the 12 clips.

4. ADJUST FOG LIGHT ASSEMBLY

(See page )

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.