Installation

1. INSTALL FRONT DOOR BELT MOULDING

(a) Engage the 5 claws to install the front door belt moulding.

(b) Install the clip.

2. INSTALL FRONT DOOR GLASS RUN

3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

4. INSTALL FRONT DOOR SERVICE HOLE COVER

5. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

6. INSTALL DOOR SIDE AIRBAG SENSOR

7. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY

8. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

9. INSTALL COURTESY LIGHT ASSEMBLY

10. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

11. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

12. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

14. INSPECT SRS WARNING LIGHT

(See page )

15. INITIALIZE POWER WINDOW CONTROL SYSTEM

(See page )