Toyota Venza: Installation

INSTALLATION PROCEDURE

1. INSTALL REAR SEAT INNER BELT ASSEMBLY LH

(a) Install the rear seat inner belt assembly LH with the bolt.

Text in Illustration

*1	Protruding Part

Torque:

42 N·m {428 kgf·cm, 31 ft·lbf}

NOTICE:

Do not allow the anchor part of the rear seat outer belt assembly to overlap the protruding part of the floor panel.

2. INSTALL REAR SEAT CUSHION COVER WITH PAD

3. INSTALL REAR SEAT INNER RECLINING COVER LH

4. INSTALL REAR SEAT RECLINING COVER LH

5. INSTALL REAR SEAT RECLINING RELEASE LEVER LH

6. INSTALL SEAT ADJUSTER COVER CAP LH

7. INSTALL REAR SEAT ASSEMBLY LH

8. CONNECT REAR SEAT NO. 2 RECLINING CONTROL CABLE SUB-ASSEMBLY

9. INSTALL REAR SEAT OUTER TRACK BRACKET COVER

10. INSTALL REAR SEAT INNER TRACK BRACKET COVER

11. INSTALL REAR SEAT HEADREST ASSEMBLY

Installation