Toyota Venza: Installation

INSTALLATION PROCEDURE

1. INSTALL TRANSFER ASSEMBLY

(a) Install the transfer assembly to the transaxle assembly with 2 new bolts and the 6 nuts.

Torque:

69 N·m {700 kgf·cm, 51 ft·lbf}

NOTICE:

2. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for 2GR-FE)

3. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY (for 1AR-FE)

4. INSTALL FLEXIBLE HOSE BRACKET SUB-ASSEMBLY (for 2GR-FE)

5. INSTALL WIRE HARNESS (for 2GR-FE)

6. INSTALL WIRE HARNESS (for 1AR-FE)

7. INSTALL TRANSFER STIFFENER PLATE RH (for 2GR-FE)

8. INSTALL TRANSFER STIFFENER PLATE RH (for 1AR-FE)

9. INSTALL MANIFOLD STAY (for 2GR-FE)

10. INSTALL STARTER ASSEMBLY (for 2GR-FE)

11. INSTALL STARTER ASSEMBLY (for 1AR-FE)

12. INSTALL FRONT FRAME ASSEMBLY (for 2GR-FE)

13. INSTALL FRONT FRAME ASSEMBLY (for 1AR-FE)

14. INSTALL REAR ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE)

15. INSTALL STEERING LINK ASSEMBLY

16. INSTALL FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY

17. INSTALL FRONT NO. 1 STABILIZER BRACKET LH

18. INSTALL FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Perform the same procedure as for the LH side.

19. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

See page for 2GR-FE

See page for 1AR-FE

Installation