Power Assist Systems
Lost Communication with ECM / PCM "A" (U0100,U0129)
In this manual: Power Assist Systems
~1min read
DESCRIPTION
PROCEDURE
The power steering ECU receives signals from the ECM and the brake actuator assembly (skid control ECU) via the CAN communication system.
DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
U0100 |
Lost communication with ECM/PCM "A" |
|
U0129 |
Lost communication with brake system control module |
|
CHECK FOR DTC (CAN COMMUNICATION SYSTEM)
(a) Clear the DTCs (See page
).
(b) Check for DTCs (See page
).
OK:
DTC is not output.
| OK | ![]() | CHECK INTERMITTENT PROBLEMS |
| NG | ![]() | GO TO CAN COMMUNICATION SYSTEM |
Test yourself
A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.gif)