Toyota Venza Quiz
Exterior Panels / Trim

Removal

In this manual: Exterior Panels / Trim
Introduction — 15Maintenance — 8Audio / Video — 102Garage Door Opener — 8Navigation / Multi Info Display — 81Park Assist / Monitoring — 50Brake (front) — 7Brake (rear) — 7Brake Control / Dynamic Control Systems — 79Brake System (other) — 28Parking Brake — 22Axle And Differential — 44Drive Shaft / Propeller Shaft — 24Mf1a Transfer / 4wd / Awd — 46U660e Automatic Transmission / Transaxle — 1241ar-fe Cooling — 311ar-fe Emission Control — 101ar-fe Engine Control — 1331ar-fe Engine Mechanical — 441ar-fe Fuel — 311ar-fe Intake / Exhaust — 211ar-fe Lubrication — 111ar-fe Starting — 16Cruise Control — 241ar-fe Battery / Charging — 162gr-fe Battery / Charging — 17Networking — 67Power Distribution — 8Power Assist Systems — 34Steering Column — 37Steering Gear / Linkage — 29Alignment / Handling Diagnosis — 4Front Suspension — 39Rear Suspension — 35Tire / Wheel — 4Tire Pressure Monitoring — 35Door / Hatch — 83Exterior Panels / Trim — 56Horn — 4Lighting (ext) — 89Mirror (ext) — 36Sliding Roof / Convertible — 26Window / Glass — 87Wiper / Washer — 30Door Lock — 85Heating / Air Conditioning — 82Interior Panels / Trim — 20Lighting (int) — 37Meter / Gauge / Display — 41Mirror (int) — 9Power Outlets (int) — 10Seat — 84Seat Belt — 43Supplemental Restraint Systems — 131Theft Deterrent / Keyless Entry — 155
~2min read
REMOVAL CAUTION / NOTICE / HINT

HINT:

When installing new name plates and emblem, heat the vehicle body, name plates and emblem using a heat light.

Heating Temperature

Item

Temperature

Vehicle Body

40 to 60 °C

Emblem, Name Plate

20 to 30 °C

NOTICE:

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE

1. REMOVE HOOD EMBLEM

(a) Put protective tape around the hood emblem.

Text in Illustration

*1

Protective Tape

(b) Using a moulding remover, peel off the double-sided tape to remove the hood emblem.

NOTICE:

  • If reusing the emblem, take care not to damage the hood emblem.
  • Be careful not to damage the vehicle body.

2. REMOVE NO. 1 BACK DOOR EMBLEM

(a) Put protective tape around the No. 1 back door emblem.

Text in Illustration

*1

Protective Tape

(b) Using a moulding remover, disengage the 2 claws.

NOTICE:

  • If reusing the emblem, take care not to damage the No. 1 back door emblem.
  • Be careful not to damage the vehicle body.

(c) Disengage the guide and remove the No. 1 back door emblem.

3. REMOVE NO. 2 BACK DOOR NAME PLATE

(a) Put protective tape around the No. 2 back door name plate.

Text in Illustration

*1

Protective Tape

(b) Using a moulding remover, peel off the double-sided tape to remove the No. 2 back door name plate.

NOTICE:

  • If reusing the name plate, take care not to damage the No. 2 back door name plate.
  • Be careful not to damage the vehicle body.

4. REMOVE NO. 3 BACK DOOR NAME PLATE (for AWD)

(a) Put protective tape around the No. 3 back door name plate.

Text in Illustration

*1

Protective Tape

(b) Using a moulding remover, peel off the double-sided tape to remove the No. 3 back door name plate.

NOTICE:

  • If reusing the name plate, take care not to damage the No. 3 back door name plate.
  • Be careful not to damage the vehicle body.

5. REMOVE NO. 4 LUGGAGE COMPARTMENT DOOR PLATE (w/ Grade Mark)

(a) Put protective tape around the No. 4 luggage compartment door plate.

Text in Illustration

*1

Protective Tape

(b) Using a moulding remover, peel off the double-sided tape to remove the No. 4 luggage compartment door plate.

NOTICE:

  • If reusing the door plate, take care not to damage the No. 4 luggage compartment door plate.
  • Be careful not to damage the vehicle body.

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.