Meter / Gauge / Display

Removal

~1min read
REMOVAL PROCEDURE

1. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System)


2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System)


3. REMOVE NO. 2 CONSOLE BOX CARPET


4. REMOVE CONSOLE BOX ASSEMBLY


5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


6. REMOVE FRONT DOOR SCUFF PLATE LH


7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


9. REMOVE FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure for the RH side and LH side (See page ).


10. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure for the RH side and LH side (See page ).


11. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


12. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


13. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


14. REMOVE POSITION INDICATOR HOUSING ASSEMBLY


15. REMOVE CONSOLE BOX SUB-ASSEMBLY


16. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


17. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)


18. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)


19. REMOVE DRIVE MONITOR SWITCH

(a) Disengage the 4 claws and remove the drive monitor switch.

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.