Audio / Video

Removal

~1min read
REMOVAL PROCEDURE

1. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System)


2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System)


3. REMOVE NO. 2 CONSOLE BOX CARPET


4. REMOVE CONSOLE BOX ASSEMBLY


5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


6. REMOVE FRONT DOOR SCUFF PLATE RH


7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH


8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


9. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY


10. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


11. REMOVE POSITION INDICATOR HOUSING ASSEMBLY


12. REMOVE CONSOLE BOX SUB-ASSEMBLY


13. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


14. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

(a) Remove the 4 bolts.

(b) Disengage the 2 clips.

(c) Disconnect each connector and remove the radio and display receiver assembly with bracket.

15. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY

(a) Remove the 4 screws.

(b) Disengage the 4 claws and remove the instrument cluster center finish panel sub-assembly.

16. REMOVE STEREO COMPONENT TUNER ASSEMBLY WITH WIRE (w/ Satellite Radio)


17. REMOVE NO. 1 RADIO RECEIVER BRACKET

(a) Remove the 4 screws and No. 1 radio receiver bracket.

18. REMOVE NO. 2 RADIO RECEIVER BRACKET

(a) Remove the 4 screws and No. 2 radio receiver bracket.

19. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.