Audio / Video

Removal

~1min read
REMOVAL PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system (See page ).


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).


2. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG


3. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


4. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY


5. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP


6. REMOVE REAR SPEAKER ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 3 bolts and rear speaker assembly.

7. REMOVE REAR SPEAKER BRACKET (for 13 Speakers)

(a) Remove the 8 screws, rear speaker bracket and rear door speaker grille sub-assembly.

8. REMOVE REAR NO. 2 SPEAKER ASSEMBLY (for 13 Speakers)

(a) Remove the 2 screws.

(b) Disengage the clamp and remove the rear No. 2 speaker assembly.

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.