Brake system (hybrid)
Assembly overview - brake pedal, LHD vehicles
Tightening torque found on this page
The brake pedal travel must not be restricted by additional floor coverings.  Note
Do not lubricate or grease the pivot pin. The pivot pin must remain dry. |
|
|
| 1 - |
Self-locking hexagon nut |
Renew after removing
Bolting sequence → Fig.
25 N·m
To remove, remove mounting bracket first
Removal: turn pivot pin clockwise until pivot pin tabs break off
Renew pivot pin
Do not lubricate or grease the pivot pin. The pivot pin must remain dry.
Installation: Turn pivot pin anti-clockwise until tabs engage audibly on stop.
| 3 - |
Pedal cluster with mounting bracket |
Removing and installing → Chapter
Cannot be renewed individually; ensure correct installation position
Separating brake pedal from brake servo → Chapter
Connecting brake pedal to brake servo → Chapter
Removing and installing → Chapter
Cannot be renewed individually; ensure correct installation position
For ball head of brake servo plunger rod.
Renew
Insert into both holes in mounting bracket.
Bolting sequence: |
|
 |
?
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?