Removing and installing brake pedal

It is not possible to remove the brake pedal separately.

• To be able to remove it, pedal cluster with mounting bracket must be removed first → Chapter.

Note

Removing brake pedal with mounting bracket removed

• Turn pivot pin clockwise in direction indicated by -arrow-.

-1- = 14 mm hex socket wrench

This action will break off the tabs -B-. Renew the pivot pin.

• Remove securing clip from pivot pin.
• Pull out pivot pin towards right.
• Remove brake pedal from mounting bracket.

Installing

Note

Renew pivot pin and securing clip.

Note

Do not lubricate or grease the pivot pin. The pivot pin must remain dry.

• Slide pivot pin from right to left through mounting bracket and brake pedal.
• Fit securing clip to pivot pin when pivot pin has been inserted into both holes in mounting bracket.

• Turn pivot pin anti-clockwise in direction indicated by -motion arrow- until tabs -A- engage audibly on stop in mounting bracket.
• Install pedal cluster with mounting bracket → Chapter.