Brake system (hybrid)
Assembly overview - brake pedal, RHD vehicles
Tightening torque found on this page
The brake pedal travel must not be restricted by additional floor coverings.
Note
Do not lubricate or grease the pivot pin. The pivot pin must remain dry.
20 N·m
Removing and installing → Chapter
25 N·m
Renew
Insert into both holes in mounting bracket.
To secure brake servo
Qty. 2
25 N·m
To remove, remove mounting bracket first
Removal: turn pivot pin clockwise until pivot pin tabs break off
Renew pivot pin
Do not lubricate or grease the pivot pin. The pivot pin must remain dry.
Installation: Turn pivot pin anti-clockwise until tabs engage audibly on stop.
Cannot be renewed individually; ensure correct installation position
Separating brake pedal from brake servo → Chapter
Connecting brake pedal to brake servo → Chapter
Removing and installing → Chapter
For ball head of brake servo plunger rod.
Cannot be renewed individually; ensure correct installation position
?
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?