Assembly overview - door

Note

Only the left side is shown. The right side is similar.

After renewal of B-pillar, the specified torque for bolts -2 and 5- as well as for -14 and 17- changes.

1 -

Rear door

• Removing and installing → Chapter
• Adjusting → Chapter

2 -

Bolt

• Loosening once to adjust door is allowed, afterwards renew always
• Installed from inside vehicle
• To remove and install, B-pillar lower trim must be removed first
• 50 N·m

Note

After renewal of A-pillar the specified torque changes.

Specified torque after renewal of A-pillar: 20 N·m + 90°

3 -	Door hinge

• The hinge is split
• Lower part is secured to hinge upper part with bolt -8-

4 -

Cap

• For bolt -8-

5 -

Bolt

• Loosening once to adjust door is allowed, afterwards renew always
• Installed from inside vehicle.
• To remove and install, B-pillar lower trim must be removed first.
• 50 N·m

Note

After renewal of A-pillar the specified torque changes.

Specified torque after renewal of A-pillar: 20 N·m + 90°

6 -

Cap

For bolt -7-

7 -

Bolt

• Always renew, loosening it once to adjust door is allowed.
• 50 N·m

8 -

Bolt

• Connects upper part of hinge to bottom part of hinge
• 23 N·m

9 -	Door hinge

• The hinge is split
• Upper part is secured to hinge lower part with bolt -8-

10 -

Bolt

• 30 N·m

11 -

Bolt

• Qty. 2
• 9 N·m

12 -	Door arrester

• Removing and installing → Chapter

13 -	Door hinge

• The hinge is split
• Lower part is secured to hinge upper part with bolt -8-

14 -

Bolt

• Loosening once to adjust door is allowed, afterwards renew always
• Installed from inside vehicle
• To remove and install, B-pillar lower trim must be removed first.
• 50 N·m

Note

After renewal of A-pillar the specified torque changes.

Specified torque after renewal of A-pillar: 20 N·m + 90°

15 -	Door hinge

• The hinge is split
• Upper part is secured to hinge lower part with bolt -8-

16 -

Bolt

• Always renew, loosening it once to adjust door is allowed
• 50 N·m

17 -

Bolt

• Loosening once to adjust door is allowed, afterwards renew always
• Installed from inside vehicle
• To remove and install, B-pillar lower trim must be removed first
• 50 N·m

Note

• After renewal of A-pillar the specified torque changes.

• Specified torque after renewal of A-pillar: 20 N·m + 90°