General body repairs, interior
Assembly overview- net partition
In this manual: General body repairs, interior
~1min read

| 1 - | Net partition |
- Removing and installing → Chapter
| 2 - | Bolt |
- 4,5 N·m
| 3 - | Remove fitting eye trim |
- Allocation → Electronic Parts Catalogue
- Removing and installing → Chapter
| 4 - | Eyelet for net partition |
- Removing and installing → Chapter
| 5 - | Bolt |
- Qty. 2
- 4,5 N·m
| 6 - | Bolt |
- 1,5 N·m
| 7 - | Bracket for eyelet |
- Allocation → Electronic Parts Catalogue
- Removing
- Remove moulded headliner → Chapter.
- Unscrew bolts -5- and remove bracket for eyelet.
| 8 - | Bolt |
- → Chapter „Assembly overview - rear outer three-point seat belt“
| 9 - | Bracket for net partition |
- Removing and installing → Chapter
| 10 - | Rubber grommet |
- Slide over bracket for net partition, and insert in luggage compartment side trim
| 11 - | Mounting |
- On right rear seat backrest (2/3)
- Removing and installing → Chapter
| 12 - | Insert |
- Removing and installing → Chapter
| 13 - | Bolt |
- Qty. 2
- 8 N·m
Note
Clean remnants of locking fluid from thread with a wire brush. Then, fit bolts using locking fluid ( → Electronic Parts Catalogue ). Also clean locking fluid from threaded holes (e.g. using thread chaser).
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?