General body repairs, interior

Removing and installing net partition mounting

~1min read

Removing

  • Remove net partition → Chapter.
  • Remove bolts -2-.
  • Remove insert -3- and mounting -1- from right rear seat backrest (2/3).
Removing and installing net partition mounting

Installing

Install in reverse order, but note the following:

Note
Note installation position of insert -1- and mounting -2-.
Secure mounting -2- in left threaded holes.
Fit locating lug on insert -1- into recess in mounting -2-.
Clean remnants of locking fluid from thread with a wire brush. Then, fit bolts using locking fluid ( → Electronic Parts Catalogue ).
Also clean locking fluid from threaded holes (e.g. using thread chaser).

Specified torques

→ Chapter „Assembly overview- net partition“

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.