General body repairs, exterior
Assembly overview - sliding sunroof
In this manual: General body repairs, exterior
~1min read
| 1 - | Glass panel for panorama tilting sunroof (single pane safety glass) |
- Removing glass panel → Chapter
- If drive defective, remove glass panel → Chapter
- Adjusting glass panel → Chapter
| 2 - | Bolt |
- Bolts are microencapsulated and must always be renewed after loosening
- Qty. 6
- 5,5 N·m
| 3 - | Seal of sliding sunroof frame |
- Removing and installing → Chapter.
| 4 - | Sunroof roller blind |
- Removing and installing → Chapter
| 5 - | Sliding sunroof frame |
- Removing and installing sliding sunroof frame → Chapter
- Guide channels are to be greased, if required, with special grease G 060 751 A2 only otherwise correct operation cannot be guaranteed.
| 6 - | Bolt |
- For sliding sunroof motor
- Qty. 3
- 4 N·m
| 7 - | Bolt |
- For sliding sunroof motor
- Qty. 1
- 4 N·m
| 8 - | Sliding sunroof adjustment control unit -J245- |
- Removing and installing control unit → Chapter
- Programming control unit → Chapter
| 9 - | Bolt |
- For the cover
- Qty. 5
- 2,5 N·m
| 10 - | Cover |
| 11 - | Bolt |
- Bolts are microencapsulated and must always be renewed after loosening
- Qty. 13
- 3 N·m
| 12 - | Guide plate |
- With tilting mechanism and cables
- Forms one component in conjunction with securing bracket of lift sun blind and control unit
- Removing and installing → Chapter
| 13 - | Wind deflector |
- Removing and installing → Chapter.
| 14 - | Bolt |
- For wind deflector
- Qty. 2
- 2 N·m
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?