General body repairs, exterior
Programming sliding sunroof adjustment control unit -J245-
In this manual: General body repairs, exterior
~1min read
Note
If a glass panel, motor or tilt mechanism have been renewed, adaption needs to be performed. The anti-trap function is switched off during adaptation.

Establishing reference points of sliding sunroof motor
Ignition is switched on.
- Pull button backwards -arrow a-, and hold it in this position during entire programming process (approx. 20 sec).
- When establishing reference points, glass panel first closes and then moves approx. 200 mm towards the rear.
- Once glass panel has closed again, the programming run is finished and rotary knob can be released.
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?