Assembly overview - transverse link, multi-link suspension, front-wheel drive

1 -

Nut

Renew after removing

2 -

Washer

3 -	Upper transverse link

Removing and installing → Chapter

4 -

Bolt

Renew after removing

Always tighten threaded connections in unladen position → Chapter

130 N·m +180°

5 -	Wheel bearing housing

6 -

Bolt

Renew after removing

Always tighten threaded connections in unladen position → Chapter

70 N·m +180°

7 -

Nut

Renew after removing

8 -	Spreader rivet

9 -	Stone deflector

10 -

Bolt

8 N·m

11 -	Lower transverse link

Removing and installing → Chapter

12 -	Eccentric bolt

A wheel alignment check must be performed if loosened → Chapter

Do not turn more than 90° in either direction (i.e. from minimum to maximum adjustment position).

13 -	Eccentric washer

Inner hole with lug

14 -

Nut

Renew after removing

Always tighten threaded connections in unladen position → Chapter

95 N·m

15 -

Subframe

16 -	Eccentric bolt

A wheel alignment check must be performed if loosened → Chapter

Do not turn more than 90° in either direction (i.e. from minimum to maximum adjustment position).

17 -	Eccentric washer

Inner hole with lug

18 -

Nut

Renew after removing

Always tighten threaded connections in unladen position → Chapter

95 N·m