Assembly overview - transverse link, multi-link suspension, four-wheel drive

1 -

Washer

2 -

Nut

Renew after removing

3 -	Upper transverse link

Removing and installing → Chapter

4 -

Washer

5 -

Bolt

Renew after removing

Always tighten threaded connections in unladen position → Chapter

130 N·m +180°

6 -	Wheel bearing housing

7 -

Nut

Renew after removing

8 -	Spreader rivet

9 -

Bolt

Renew after removing

Always tighten threaded connections in unladen position → Chapter

70 N·m +180°

10 -	Lower transverse link

Removing and installing → Chapter

11 -	Stone deflector

12 -

Bolt

8 N·m

13 -

Subframe

14 -	Eccentric bolt

A wheel alignment check must be performed if loosened → Chapter

Do not turn more than 90° in either direction (i.e. from minimum to maximum adjustment position).

15 -

Nut

Renew after removing

Always tighten threaded connections in unladen position → Chapter

95 N·m

16 -	Eccentric washer

Inner hole with lug

17 -	Eccentric bolt

A wheel alignment check must be performed if loosened → Chapter

Do not turn more than 90° in either direction (i.e. from minimum to maximum adjustment position).

18 -	Eccentric washer

Inner hole with lug

19 -

Nut

Renew after removing

Always tighten threaded connections in unladen position → Chapter

95 N·m