Assembly overview - windscreen wiper system

Note The illustration shows fitting locations for LHD vehicles. Fitting locations for RHD vehicles are similar.

1 -	Wiper blade on driver side

Different lengths. Refer to → Electronic Parts Catalogue.

Removing and installing → Chapter

2 -	Wiper blade on front passenger side

Different lengths. Refer to → Electronic Parts Catalogue.

Removing and installing → Chapter

3 -	Wiper arm on front passenger side

Different lengths. Refer to → Electronic Parts Catalogue.

Removing and installing → Chapter

Adjusting → Chapter

4 -

Cap

5 -

Nut

Specified torque: 20 N·m

6 -

Bolt

Tightening sequence → Fig.

7 -

Bolt

Tightening sequence → Fig.

8 -	Wiper frame

With wiper motor -V-.

With wiper motor control unit -J400-.

Removing and installing → Chapter

9 -

Bolt

Tightening sequence → Fig.

10 -

Nut

Specified torque: 20 N·m

11 -

Cap

12 -	Wiper arm on driver side

Different lengths. Refer to → Electronic Parts Catalogue.

Removing and installing → Chapter

Adjusting → Chapter

Removing and installing wiper motor – specified torque and tightening sequence Tighten bolts in stages in sequence shown:

Stage	Bolts	Specified torque
1.	-1 … 3-	Screw in by hand as far as stop.
2.	-1 … 3-	8 N·m